Girro Sim XR Pro 2-Pedals set
Girro Sim XR Pro 2-Pedals set Girro Sim Pro XR Pedals are handmade in Poland with the best material (3-6 mm glass blasted stainless steel) and connected to the PC with a high-quality LeoBodnar USB 16 bits Interface Board.
The brake pedal has a Mavin load cell of up to 100 kg. 20 mm black bushings make the elastomers work in the right range. This prevents cracking and changes to the properties of the elastomers. The advantage of this solution is the progressive increase in brake pressure and the forced air from elastomers gives it a more hydraulic feeling. By adding a 2 mm bushing you have full control over the stroke. To shorten any phase of the brake pedal, simply add 2mm black sleeves. Now you can set the soft brake pedal, but you can shorten it as you like.
Two Hall sensors on the other pedals precisely determine the positions of the accelerator and clutch pedals. There are two options for setting the force on the accelerator pedal. On the clutch, you can adjust the force of the spring pressure and the rebound of the pedal.
Girro Sim`s pedals are the best choice if you need perfect control of the car in sim racing games like Iracing, Asseto Corsa Competizone, Dirt Rally, Raceroom Racing Experience, Asseto Corsa, Richard Burns Rally, Rennsport, rfactor2 etc.
Possible brake pedal configurations:
|Dimensions||420 × 370 × 120 mm|
● Throttle pedal with hall sensor
● Brake pedal with load cell sensor (100 kg)
● USB cable
● Leo Bodnar 16 bits USB interface
● 2x elastomers (70kg) for the brake pedal
● Purple spring for the brake pedal
● 7/10 wrench – 2x Allen keys (2,5/5mm)
● 3x 20mm black bushings
● 10x 2mm black bushings